PRELIMINARY PREPARATION
Prepare the materials, that are necessary for the lens care. Prepare a clean, smooth surface. When carrying out procedures above the sink, plug the drain with a plug. Wash and rinse your hands thoroughly. To avoid confusion, it is recommended to always start with a specific lens – for example the right lens.
Stage 1: LENSES CLEANING
- Fill the cells of the lens storage case with a universal solution.
- Remove the lens from the right eye and place it on the open palm of the hand.
- Put a few drops of the universal solution on the lens.
- Using your index finger, carefully smear the solution on both surfaces of the lens.
CLEANING every time after removing the lenses from the eyes ensures the removal of the deposits from the surfaces of the lenses.
WASHING the lenses ensures the destruction of the deposits removed from the lens surfaces.
DISINFECTION of the lenses ensure the destruction of microorganisms, that cause irritation and inflammatory processes.
Stage 2: LENSES WASHING
After cleaning the lenses, rinse them thoroughly with a continuous stream of clean universal solution to remove all the dirt.
Stage 3: DISINFECTION OF THE LENSES
- Place the lens in the appropriate slot of the lens storage case.
- Completely immerse the lens in the universal solution.
- Wrap the cap and repeat the three procedures described above with the second lens.
- Leave the lenses in the case overnight or at least, for 4 hours.
- After the disinfection you can remove the lenses from the case and insert them into your eyes (it is not necessary to wash the lenses after the disinfection).
- Then drain the solution and rinse the case with the clean solution. Screw on the lids. The case is ready for the next use.
Weekly enzymatic cleaning
Enzymatic cleaning serves to remove protein deposits and ensures the transparency of the lenses and ease of use.
- Wash both cells of the lens storage case with a universal solution.
- Fill both cells of the lens storage case with clean solution.
- Dissolve one enzyme tablet in each cell .
- Take both lenses out of your eyes, clean and rinse rhem as usual, and then put them in the corresponding cells of the case.
- Completely immerse the lenses into the solution.
- Screw on both lids, shake the case and soak the lenses in the solution for 5 minutes. Dirtier lenses require longer soaking, but no more than 2 hours.
- Remove the lenses from the case, clean and rinse them with a universal solution, as you normally do when cleaning and washing them.
- Empty the case from the remains of the solution and rinse it thoroughly with a clean solution.
- Fill both cells of the case with clean solution.
- Place the lenses in the case and disinfect them in the usual way. After disinfection, the lenses can be inserted into the eyes.